Environmental Protection Agency estimates that Americans spend more than 90% of their life in indoor areas. It warns that poor air quality can lead to different types of respiratory and skin problems. Pollution levels in indoor areas can increase up to 100 times if the factors responsible for this pollution are not controlled in time. The quality of indoor air depends a lot on the proper functioning and maintenance of your HVAC system. If this device is not maintained well, you will face poor air quality problems in the rooms. Contact an HVAC contractor when you notice the symptom of a fault in your HVAC. Such symptoms indicate the HVAC requires repair or maintenance service.
The Proper Time For These Services
The correct proper time to service your HVAC unit is in spring and fall. It will increase the lifespan of the system. Some problems require immediate attention. Maintenance services can be carried out 1-2 times in a year depending on the type of HVAC system you have and the maintenance schedule recommended by its manufacturer. Take good care of your HVAC system to ensure a comfortable, safe and healthy place in your home. Timely maintenance and repair services are necessary to keep it working properly and smoothly.
Following Tips And Tricks Will Prolong The Lifespan Of An HVAC System
- Do not allow dirt and debris to collect in your HVAC machine. Keep its surrounding areas clean to ensure free airflow.
Improper installation is one reason an HVAC keeps giving frequent troubles. Avoid the wrong system settings. These steps will ensure your system keeps working smoothly whenever you operate it. It is a myth that a bigger AC is always better. Contact an experienced HVAC contractor who will measure your rooms and determine the right size and capacity of HVAC for your home.
- The ideal HVAC temperature during summer should be 78 degrees, while it should be 68 degrees in winter. Learn about the problems HVAC owners face so you can identify the fault symptoms quickly.
- Always call a professional HVAC technician to solve any major fault in this system.
Do not supply water to the furnace humidifier during the hot weather conditions. You can set its humidity level between 30 and 40 percent during the winter season by regulating the water supply.
- Keep the registers higher than 20% to avoid straining your HVAC device.
- The batteries of the carbon monoxide detection system should be replaced at least once a year.
Insufficient lubrication will lead to friction between moving parts, reducing their efficiency and damaging them. They will wear out faster. Lubricate your HVAC parts regularly to prevent unnecessary friction.
- The condensate drain should be kept clean to prevent the growth of fungus, algae and harmful bacteria. It will prevent accumulation of dirt and debris in this line.
Prepare a mixture of one cup bleach with three cups water. Pour this solution into the condensation drain line to keep it clean.Keep in mind that even after all necessary repair and maintenance services, the life expectancy of an HVAC system is not more than 15-20 years. If your HVAC device is nearing its end, you should consider buying a new setup rather than repair the old one.
The following tips will help you select the perfect new HVAC system.
- Calculate the size and volume of the area that needs heating and cooling
- Take into account the construction material, such as concrete, wood, tiles or others
- Check how much shade your home receives
- Determine the most comfortable indoor temperature
- Keep your walls and ceilings properly insulated to reduce cooling and heating requirements
- Count windows, doors and skylights
- Check facing directions of windows and doors
An assessment of the above factors will help you buy an HVAC system that will operate efficiently throughout the year. This device is the respiratory setup for your home. Keep your heating and cooling systems at the right places. Keep them clean to ensure they work smoothly and do not give you any trouble. The air ducts connected to this system should be cleaned when they become dirty. Change the filters at least once in three months or earlier if they become dirty quickly due to heavy use of the system.
Dirty filters affect the working of the HVAC system in several ways.
- Causing system failure
- Dirt and debris, such as dust, pet hair, mold, rodent infestation and other things affect the HVAC’s efficiency
- Energy wastage will lead to higher electricity bills
- Ensure proper working of your HVAC by taking care of your heating AC and furnace systems
Take following steps to keep both systems working efficiently.
- The flame of the furnace indicates the condition of the heating system. A crisp blue flare indicates the system is working properly, but if the shades are orange or yellow, you need the services of a furnace repair company to fix the problem.
- Plug any leakage and fix the loose connection quickly before they cause safety or efficiency problems.
- As the furnace ages, it can develop more faults, leading to frequent breakdowns. If it is 15-20 years old and the repair bill is expected more than 15% of a new furnace price, it is better to replace it.
- An overworking furnace leads to higher energy bills. Contact a furnace repair company if you start seeing an increase in your energy bills.
- An inefficient furnace will cool or warm the room unevenly.
- An outdated system fails to distribute the heat evenly across the house.
- Contact a professional HVAC contractor if you see any such problem.
Heating AC System
- It can be difficult to repair the heating AC system, especially if the winter season has already started.
- It can become an emergency if your heater breaks down suddenly. You will be forced to call for emergency HVAC repair service which will cost you higher.
Do not ignore these problems of your HVAC system.
- You have to spend more than necessary on heating. Heating bills are proving costly to you.
- You keep turning up the thermostat but the rooms never get warm enough.
- When an air conditioner short cycles, it is not working as long as it should to complete the heating cycle. It will be wasting lots of energy in starting and stopping.
- Check any flame discoloration and turn off your furnace when you notice any such issue. A good furnace flame looks blue. If not, it indicates rust or debris buildup inside the burner.
- Call a professional HVAC technician at least two times a year to inspect your HVAC system. The technician will check all faults including the faults related to the motors and electrical supplies.